Pharmaceutical Pipe Supports — Validated for cGMP
Pipe clamps for WFI, purified water and API process lines. Full material traceability + 3.1 certs.
Pharma piping operates under FDA validation and cGMP scrutiny. Every component needs traceable material certificates, electropolished surfaces and validated cleanability. NIBRO supplies pharmaceutical clamps with full 3.1 material traceability and electropolished finishes down to Ra 0.4 µm.
Pharma-specific clamp specification
• Material: AISI 316L, dual certified per EN 10204 3.1, heat number traceable to mill.
• Finish: Electropolished, Ra ≤ 0.4 µm on wetted surfaces (Ra ≤ 0.8 µm available standard).
• Hardware: A4-80 cap screws, captive nylock nuts (cleanroom compatible).
• Liner: USP Class VI EPDM or PTFE, available with batch certificate of compliance.
• Documentation: Material cert + dimensional cert + statement of conformity per batch.
Take this spec sheet into your next design review
NIBRO-branded A4 PDF — printable, with QR back-link and recommended products table.
8 clamps that fit this application
DIN 1593 diepe kapbeugel316
Diepe kapbeugel316
Complete kapbeugel zwaar316
DIN 3567 pijpbeugel — enkele beugel316
1/2DIN 3567 pijpbeugel — set (boven + onder + bouten + moeren)316
DIN 3567-B pijpbeugel — enkele beugel316
1/2DIN 3567-B pijpbeugel — set (boven + onder + bouten + moeren)316
Halve pijpbeugel316
1/2Frequently asked
Ready to spec your supports?
Talk to our engineering team. Factory direct from Oisterwijk, Netherlands.